Helle Knife Making Accessories

Helle Knife Making Kits For those just beginning, the knife making process may seem daunting - Helle's unfinished Harding and Byggesset kits allow one to "get their feet wet" so to speak without having to start at square one.

Front Fittings Front fittings seat between the top of the handle and the spine of the blade.

Butts/Pins Used to secure the end of a stick tang into the end of the handle, by peening the end of the tang into the butt and handle.

Rivets & Bushings Used in the construction of full tang blades.

Helle Flat Brass ButtsHelle's flat brass butts come in either 3.8 or 4mm diameters, and work with a variety of Helle's blades.

Helle Jegermester Front FittingThe Helle Alden front fitting is made from brass, and marries with the Helle Jegermester blade blank.

Helle Rivet & Bushing Set for Temagami, Wabakimi, and Didi Galgalu BladesThis Helle Rivet & Bushing Set is designed to fit Helle's Temagami, Wabakimi, and Didi Galgalu Blades.

Helle Rivet Set for Mandra BladeThis Helle rivet set is designed for the Mandra blade blank.

Helle Harding Front FittingThe Helle Harding front fitting is made from stainless steel, and marries with the Helle Harding blade blank.

Helle Alden Front FittingThe Helle Alden front fitting is made from stainless steel, and marries with the Helle Alden blade blank.

Helle Viking PinThe Helle Viking Pin is used as a base to peen the blade's tang at the butt for Helle's Viking and Saga Siglar blade blanks.

Helle Harding Brass Butt #2The Helle Harding brass butt allows for the use of a leather strap to help secure in it's sheath.

Helle Wabakimi Blade BlankHelle's Wabakimi Blade Blank for creating your own unique handle. Made in Norway from Helle's H3LS triple laminate stainless steel.

Helle Partly Finished HardingHelle's Partly Finished Harding is the perfect starting point for those wishing to explore making their own, but who may feel daunted by starting with only a blade blank. Featuring a triple laminated Harding blade installed in rough sawn oak and curly birch with leather spacers, the partly finished Harding awaits forming, shaping, and polishing of the handle to your own unique specifications.

Helle Handle - One Piece of Curly BirchSolid block piece of Helle's curly birch for making your own handle.

Helle Rivet Set for Utvaer BladeThis Helle rivet set is designed for the Utvaer blade blank.

Helle Nying Brass Butt #1Brass butt for Helle Nying and Helle Olakniven blade blanks.

Helle Speider Front FittingStainless steel front fitting for the Helle Speider blade blank

Leather Needle for Repairs and DIY LeatherworkRobust triple sided needle for leatherwork and canvas field repairs.

Helle Steinbit Brass Butt #5The Helle Steinbit flat brass butt #5 is a flat style butt that fits the Steinbit blade blank.

Helle Speiderkniven Front Fitting The Helle Speiderkniven front fitting set is designed for use with the Speiderkniven blade blank, is made from stainless steel, and includes a front fitting and finger guard.